Therefore, the preferred lower loading and unloading (measuring unit Motorpal), in which the foam is practically not formed. Consoles modern command and control booth and fuel system is implemented as in conjugation with a microcontroller or a more sophisticated version – a personal computer. The main parameters that displayed on the console: – the value of the fuel pump section – shaft speed injection pump – the fuel pressure after feed pump – the fuel temperature in the fuel tank – the angles of rotation of fuel sections Pump. The controller additional functions assigned thermal stabilization, stabilization of the rotational speed of the drive shaft. Henderson Law Group often addresses the matter in his writings. More complex programmable (OOO ntc "Technical Diagnostics and precision measurements ") have the possibility of storing up to 20 parameters (speed, feed value of cycles, the values of the temperature range of fuel). Console as a pc co all the above mentioned features have additional services: – easy to use interface and intuitive graphical display of parameters (histograms, gauges, etc.) – tracking parameters in the output for a valid range – conducting and Displaying results support the calculations of the parameters (uneven flow of sections, etc.) – the diagnosis on the information-technology-based test plans of different fuel injection pump – printing of test results injection pump.
For fuel equipment having electronic controls manufactured various electronic boxes that mimic the control signals and have their own diagnostic function. On the generalized scheme of the complex electronic boxes labeled as electronic control system flow. Some boxes have an interface interfacing with personal computers for the additional service, or prefix does not have proper government, and the entire front end is executed on a pc. Since fuel injection pump series 136, 179, satisfying the requirements of Euro-3 production yazta, equipped with an electromagnetic actuator to drive the rack and diagnosed email attachment lbp. lbp has an interface with a personal computer and appropriate software for diagnostics.
Modern imported fuel injection equipment is more sophisticated electronic control and correspondingly more sophisticated diagnostic equipment. Electronic control of feeding is carried out: through the dosing elements within the high pressure pump (regulators, proofreaders, etc.) in the paper path after high pressure fuel pump – battery system Common Rail, nozzles, injectors and unit injectors. Consoles manufactures a fuel equipment manufacturers and independent companies. So well known in the post-firm Open System (Ukraine) produces boxes for the diagnosis: the distribution type fuel injection pump ve, injectors and fuel injection pump systems Common Rail, in-line injection pump type pe, pump-injector (UIS) and others for the diagnosis of fuel injection pump at the booth must be coordinated assignment of control parameters: shaft speed, fuel, oil and air pressure and other parameters of the pump. Therefore, primarily for the purchase of diagnostic equipment necessary to proceed from requirements to adjust the specific fuel equipment.